Large Direct-Pure EDI Lab Water Systems

The Large Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of product water is above 5 MΩ·cm (25 ℃) ,which meets or exceeds Type Ⅱ water quality standard defined by ASTM, CAP, CLSI and ISO 3696/BS 3997, the European and U.S. Pharmacopoeia. The System is designed for users who need 400 to 1800 liters of Type II water per day.

Features：
– The system incorporates the best in class Siemens EDI module to deliver high quality Type II water consistently at relatively lower cost.
– Automatic water quality control programs ensure EDI product water meeting or exceeding Type II water requirements.
– The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.
– The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
– RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements.

Main Applications:
– Type II Pure water can be used in many areas. Some of the typical applications are:
– Preparation of bio-reagents
– Preparation of culture media
– Preparation of solution for chemical analysis such as HPLC, ICP etc.
– For clinical analyzers
– Feed water for ultrapure water systems
– Medical device and equipment rinsing
– For serum and blood fractions
– For ophthalmics

Specification：

*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.

Ordering information:

Cartridge set is required for the water systems to function. Please contact RephiLe for detailed information.

Large Direct-Pure EDI Water System